SC-243 PIN-OUT

Hello,

got a question concerning the pin-out of the SC243.
In the schematics of the DK241 as well as DB240 it is asumed that the pin:
X26-19 is related to USB1_TXN/UART4_TXD
X26-21 is related to USB1_RXD/UART4_RTS
X26-22 is related to USB1_TXP/UART4_RXD
X26-23 is related to USB1_RXN/UART5_TXD
X26-28 is related to USB1_PRTPWR/UART5_RXD/PIO25
but the Hardware Manual v1.01 says that the corrosponding pins are related differently
X3-19 is related to USB1_TXN/UART4_RTS
X3-21 is related to USB1_RXD/UART4_RXD
X3-22 is related to USB1_TXP/UART4_TXD
X3-23 is related to USB1_RXN/UART5_RXD
X3-28 is related to USB1_PRTPWR/UART5_TXD/PIO25
Which shall I trust?

The Hardware Manual is correct.
The signal names in the schematic are wrong, including the silkscreen on the DB240.

We will correct this.
Thanks.

Regards